サブウーファーを正しく設定する-仕組み
サブウーファーには多くの場合、さまざまな設定オプションがあります。 低音ボックスを正しく設定する方法と、注意すべき点について説明します。 ウーファーの正しい配置も重要です。
サブウーファーを正しく配置する
アクティブとパッシブのサブウーファーがあります。 特にアクティブなものは主にさまざまな設定オプションを提供しますが、パッシブなものであっても、正しい配置で多くのサウンドを変更できます。
- サブウーファーの配置は特に重要です。壁までの距離に応じて、直接音と最初の壁の反射のオーバーレイは、波長に応じて建設的または破壊的にオーバーラップするため、櫛形フィルター効果を作成します。
- お気に入りの曲を再生し、音が好きになるまで、サブウーファーの距離が異なる部屋の一般的なリスニング位置から聴くのが最適です。
サブウーファーを調整します-これに注意を払う必要があります
音量/レベル:このコントロールは、サブウーファーの音量を制御します。
- 小さな部屋では、いわゆる「部屋モード」により、部屋の大部分で低周波数がro音を立てます。 この場合、コントロールを少し下げます。
- 主にソフトな音楽を聴きますが、低音の聴力閾値は中高音よりもかなり高いため、コントロールを上げます。
- ホームシネマのシネマレベルで「低周波効果」を体験できるように、必要に応じて音量を少し上げます。 しかし、低音は壁を特によく貫通するため、必ず隣人に配慮してください。
分離周波数:このコントロールは、ローパスフィルターのカットオフ周波数、つまり、フルボリュームでサブウーファーから(まだ)放出される最高周波数を指定します。
- ここで妥協点を見つける必要があります。 カットオフ周波数が高いほど、豊かな低音が放出されます。 これは、他のスピーカーがかなり小さい場合に特に重要です。
- しかし、80〜数百ヘルツの周波数は、より良くローカライズできます。 これにより、サブウーファーの位置とファントムソースの位置の間に矛盾が生じる可能性があります。たとえば、古いジャズやロックンロールのレコードでは、低音が中央ではなくはっきりとサイドに配置されることがよくあります。
位相/ 0°/ 180°:ステレオ三角形とITU-R BS.775-1に準拠した5.1スピーカーのセットアップは、リスナーと各スピーカーの距離がほぼ等しいため、すべての信号が同時にリスナーに届きます。
- リスニングルームでこれが不可能な場合は、サブウーファーの位相を調整して、信号が同位相で届くようにすることができます。
- たとえば、クロネッカーデルタを使用してこれをテストできます。インパルスサウンドが短く鮮明であるほど、スピーカー信号はより正確に同相で到着します。
クロスオーバー/フィルター次数/クロスオーバーネットワーク:一部のスピーカーシステムでは、ウーファーからミッドレンジへの移行の急峻さ、つまり急峻さを設定できます。
- 試行では、ウーファーからミッドレンジへの段階的な移行、つまり低次のローパスフィルターが、奇数の周波数応答にもかかわらず最高のリスニングエクスペリエンスを提供することが示されています。
システム全体のサウンドを最適化するには、イコライザーを調整するためのヒントが役立ちます。 さらに実用的なヒントとして、ドルビーサラウンドとドルビーデジタル、およびステレオとディスクリートサラウンドフォーマットの比較を提供します。