サウンドバーをテレビに接続する-仕組み
サウンドバーをテレビに接続する場合、最初に使用可能な接続を明確にする必要があります。 一部のモデルには特別な接続がありますが、ほとんどの場合、一般的なスピーカーから知っているように普遍的な接続があります。 この実用的なヒントでは、サウンドバーをテレビに接続する方法を紹介します。
1.サウンドバーとテレビへの接続を確認します
サウンドバーを接続する前に、両方のデバイスの入力と出力を確認する必要があります。 これを行うには、次の手順に従います。
- サウンドバーの裏側を見て、写真を使用して、モデルの接続を比較してください。
- 次に、テレビの背面とサイドフレームを見てください。 ここで、サウンドバーの入力の1つと一致する少なくとも1つのオーディオ出力を見つける必要があります。
- 両方のデバイスでデジタルまたは光オーディオ接続(S / PDIF)を見つけることができる場合、これを使用することをお勧めします。 または、もちろんアナログRCAプラグまたはHDMIを使用することもできます。
2.サウンドバーをテレビに接続します
これで、使用できる接続がわかりました。 適切なケーブルがあれば、サウンドバーをテレビに接続できます。
- これを行うには、ケーブルの一方の端をテレビのオーディオ出力に差し込み、反対の端をサウンドバーのオーディオ入力に差し込みます。
- シンチプラグの場合、それらの一部が黒赤のペアで提供されていることを確認してください。 この場合、黒い端を白いコネクタに挿入します。
3.テレビの再生デバイスとしてサウンドバーを選択します
多くのテレビは、外部スピーカーを自動的に認識します。 そうでない場合は、自分で再生デバイスを選択する必要があります。
- 最初にテレビのメニューを開きます。
- [オーディオ]メニュー領域に移動します。 デバイスに応じて、これは異なると呼ばれることもあります。
- ここで「オーディオ出力」の設定を探します。 この時点で、使用しているチャンネルを選択します(例:Cinchのアナログ、S / PDIFのデジタル/オプティカル、HDMIのHDMI)。
- 一部のテレビでは、内蔵のテレビスピーカーを引き続きアクティブにするかどうかも選択できます。 サウンドバーからのサウンドのみが必要な場合は、ここで「オフ」を選択する必要があります。
または、スピーカーをPlayStation 4に直接接続する方法を示します。